ROLLER LUBRICATORS

ROLLER LUBRICATORS Ø46, MODEL LUP

Lubrication unit with rollers diameter 46 mm for metal strips with perfectly even application.
The strip gets lubricated by passing between felt rolle rs. The quantity of oil that the rollers receive from a pump can be adjusted by taps located directly on the rollers.

Features:

Metal structure

Exceeding oil release

Felt rollers external Ø 46 mm

Spring clamping

Mechanical device for lower roller locking

Oil flow adjustments by taps located on the upper and lower rollers

Maximum oil viscosity 40° C- 150 mm2

Material thickness from 1 to 2,5 mm

Dimensions:

ROLLER LUBRICATORS Ø46 WITH PISTON, MODEL LUP/PN

Lubrication unit with rollers diameter 46 mm for metal strips with pneumatic pistons for upper roller lifring and clampinng. The strip gets lubricated by passing between felt rollers. The quantity of oil that the rollers receive from a pump can be adjusted by taps located directly on the rollers. This lubricator has a manual command valve for lifting and clamping and also an adjustment device for air pressure max 2bar.

Features:

Metal structure

Exceeding oil release

Felt rollers external Ø 46 mm

Felt thickness 5 mm

Lifting and clampling of the upper roller by pneumatic pistons

Manual command valve for lifting and clamping with adjustment device for air pressure max 2bar

Mechanical device for lower roller locking

Oil flow adjustments by taps located on the upper and lower rollers

Maximum oil viscosity 40° C- 150 mm2

Dimensions:

ROLLERS LUBRICATOR Ø95 WITH PISTON, MODEL LUP90/PN

Lubrication unit with rollers diameter 95 mm for metal strips with pneumatic pistons for upper roller lifring and clampinng. This lubricator has a manual command valve for lifting and clamping and also an adjustment device for air pressure max 2bar.

Features:

Metal structure

Exceeding oil release

Felt rollers external Ø 95 mm

Felt thickness 7,5 mm

Lifting and clampling of the upper roller by pneumatic pistons

Manual command valve for lifting and clamping with adjustment device for air pressure max2bar

Oil entrance at both rollers sides

Mechanical device for lower roller locking

Oil flow adjustments by taps located on the upper and lower rollers

Maximum oil viscosity 40° C- 150 mm2

Material thickness from 1 to 5 mm

Dimensions:

TANKS FOR ROLLER LUBRICATORS

	NON PRESSURIZED TANK Tank capacity 6lt Visual checking of oiL level Electricvalve for closing oil supply to rollers when the machine stops Plastic tank capacity 5 lt for exceeding oil stockage n. 3 pipes, length 2 m for tank linking to the roller lubricator Electricvalve voltage 24VAC Available upon request: Electricvalve in 24VDC or 110VAC Electric oil level checking
	PRESSURIZED TANK Tank capacity 18 lt. Electric oil checking Air pressure adjustment from 0 bar to 2 bar Venting valve 2 bar Inox tank to be placed on the floor Electricvalve to adjust the oil supply to the rollers Plastic tank capacity 5 lt for exceeding oil stockage n. 3 pipes, length 2 m for tank linking to the roller lubricator Electricvalve voltage 24VAC Available upon request: Electricvalve in 24VDC or 110VAC